SET-UP INSTRUCTIONS (CONT)
Setting Sound Options
The display can be set to stay silent or beep while operating the scale. Follow this procedure to
set the preferred option.
Help
1. Press
2. While in the Help menu, press
Press
to advance to the next menu.
3. While in the "Set Options" sub-menu, press
through the options until "Sounds" is highlighted in red.
4. Press
for the display to stay silent while operating the scale. Choose
"Enable" for the display to beep while operating the scale.
Note:
You must press
Activating/Deactivating AC Auto Off
When powering the scale via the AC adapter, the display can be set to power off after a period
of inactivity. Follow this procedure to set the preferred option. Note: When powering the scale
via batteries, the scale will automatically power off after a period of inactivity. See the next
section to set the preferred time of inactivity before power off.
1. Press
Help
2. While in the Help menu, press
Press
to advance to the next menu.
3. While in the "Set Options" sub-menu, press
through the options until "AC Auto Off" is highlighted in red.
Press
4.
"Enable" for the display to turn off after a period of inactivity.
Choose "Disable" for the display to always remain on.
Note:
You must press
Setting Auto Off Timer
When powering the scale via batteries or if Auto Off is Enabled for the AC adapter, the period of
inactivity before the scale powers off can be set to a specific amount of time. Follow this procedure
to set the amount of seconds of inactivity before power off.
1. Press
Help
2. While in the Help menu, press
Press
to advance to the next menu.
3. While in the "Set Options" sub-menu, press
through the options until "Auto Off Seconds" is highlighted in
red.
4. Press
Choose from 60, 90, 120, 150 or 180 seconds.
Note:
You must press
P/N UM2600KL_ 2600KG_2610KL_2610KG_E_REV20190827_web
to access the Help menu options.
to change the "Sounds" option. Choose "Disable"
Enter
to save your selection.
to access the Help menu options.
to change the "AC Auto Off" option. Choose
Enter
to save your selection.
to access the Help menu options.
to change the "Auto Off Seconds" option.
Enter
to save your selection.
to select "Set Options".
to scroll
to select "Set Options".
to scroll
to select "Set Options".
to scroll
12