Maintenance And Cleaning - Health O Meter Professional 2600KL Instrucciones De Uso

MAINTENANCE AND CLEANING

Maintenance
The following pages provide instructions for maintenance, cleaning, calibration, and
troubleshooting for your scale. Maintenance operations other than those described in this
manual should be performed by qualified service personnel.
Caution: Before first use, or after long periods of non-use, check the scale for proper
operation and function. If the scale does not operate correctly, refer to qualified service
personnel.
1. Check the overall appearance of the scale for obvious damage, wear, and tear.
2. Inspect the AC adapter cord for cracking, fraying, and for broken/bent prongs.
Cleaning and Disinfecting
Proper care and cleaning is essential to ensure a long life of accurate and effective weighing.
Caution: Disconnect the scale from the AC adapter power source prior to cleaning the
unit.
1. Health o meter
cloth or disposable wipe:
● mild soap and water solution
● 70% isopropyl alcohol
● solution with 1-5% hydrogen peroxide concentration
After cleaning/disinfecting, wipe with a cloth dampened with water and then with a clean dry
cloth. To avoid residue build-up or damp surfaces, ensure the screen and scale parts are
completely dry after cleaning.
2. Never use rough or abrasive materials to clean the scale, as these will damage the scale's
finish.
3. Do not submerge the scale in water or any other liquid.
4. Do not pour or spray fluids directly on the scale.
Replacement Parts
Parts may be available if a piece of the scale needs to be replaced. Contact Health o meter
Professional Scales Customer Service at 1-800-815-6615 to inquire about the availability of these
replacement parts.
Part #
ADPT30
B2266701-0
LVERSIONCABLE
B3822801-0
10-00252
P/N UM2600KL_ 2600KG_2610KL_2610KG_E_REV20190827_web
®
Professional recommends using one of the following solutions on a soft
Description
Power Adapter
Replacement foot
Replacement load cell cable
Replacement battery door cover
Replacement battery holder
22
®