Service; Appliance-Specific Safety Instructions For Grinders; Working Procedures - Parkside PMFW 310 D2 Traducción Del Manual De Instrucciones Original

5 . Service

a) Have your power tool serviced by a qualified
repair person using only identical replace­
ment parts. This will ensure that the safety of
the power tool is maintained .
Appliance­specific safety instructions
for grinders
WARNING!
■ Dusts from materials such as leaded paint,
some types of wood and metal can be
harmful to your health .
■ Contact with or inhalation of these dusts can
represent a health hazard for the person
operating the appliance and other people
in the vicinity .
■ Wear safety goggles and a protective dust
mask!
Residual risks:
Even if you operate this power tool properly, there
will still be residual risks . The following risks can
occur in the context of the design and construction
of this power tool:
a) Lung damage, if no suitable breathing protec-
tion is worn .
b) Hearing damage, if no suitable hearing pro-
tection is worn .
c) Damage to health caused by vibrations if the
appliance is used for extended periods or is
not properly used and maintained .
PMFW 310 D2
WARNING!
■ The power tool creates an electromagnetic
field during operation . This field can, in certain
circumstances, impair active or passive medical
implants . To reduce the risk of fatal injuries,
we recommend that people with medical im-
plants consult their doctor and the manufac-
turer of the medical implant before operating
this machine .

Working procedures

Working principle:
The oscillating drive causes the application tool to
move back and forth at speeds of up to 21000
times a minute . This allows for precision work even
in confined spaces .
Sawing/cutting:
■ Use only undamaged saw blades that are in
perfect working order . Bent, blunt or otherwise
damaged saw blades may break .
■ When sawing lightweight construction materials,
follow the statutory regulations and all recom-
mendations from the material manufacturers .
■ Only soft materials such as wood, plasterboard
or similar should be processed using the plunge
saw process .
Sanding:
■ To prolong the service life of the sanding sheets,
ensure that you apply even pressure .
GB │ MT │ 41 ■