Assembly
Dust/chip extraction
Materials containing asbestos may not be processed .
Asbestos is a known carcinogen .
WARNING! RISK OF FIRE!
■
When working with electrical appliances that
can be connected to a vacuum cleaner via a
vacuum cleaner adapter, there is a risk of fire!
In unfavourable conditions, e .g . when sparks
are flying while sanding metal or metal
residues in wood, wood dust in the bag of
the vacuum cleaner can spontaneously ignite .
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after be-
ing worked for a long time . Therefore, avoid
overheating of the material being sanded
as well as the appliance . Always empty the
vacuum cleaner's dust bag before taking
work breaks .
Wear a dust mask!
■
Always use dust extraction .
■
Ensure that your workplace is adequately
ventilated .
■
Observe the regulations applicable in your
country regarding the materials to be worked .
Connecting a dust extraction
appliance
♦
Push the extraction duct
tor
together . Push the Adapter for external
extraction
into the suction channel
♦
Push the hose from a suitable dust extraction ap-
pliance (e .g . a workshop vacuum cleaner) onto
the adapter for external vacuum extraction
■
42
│
GB │ MT
and the ring connec-
.
.
Selecting a tool
NOTE
►
The tool holder fitting with easy tool change
is suitable for standard accessories .
Plunge saw blade (20 mm) Z20 C3
Materials:
aluminium, copper sheets and pipes up to approx .
3 mm
Application:
cutting and shortening pipes and sheets .
Plunge saw blade (32 mm) Z32 C3
Materials:
wood, plastic, gypsum (plaster) and other soft
materials
Application:
–
separation and plunge saw cuts
–
sawing close to edges, even in hard to reach
areas
Example: sawing of recesses in lightweight walls .
PMFW 310 D2