16 Operation and Handing
16.1 Operating Instructions
16.2 Removing the vacuum chamber
caso Vakuumierer VC100
This chapter provides you with important notices with regard to
operating the device. Observe the following notices to avoid
dangers and damages:
After each sealing session and before starting up, check to
make sure the unit and all accessories that come in contact
with the foodstuff are thoroughly clean. Follow the cleaning
instructions on the description page.
Step 1: Open the lid and place an open side of the bag in the
vacuum chamber- with the smooth side up.
Step 2: Press the cover down
Step 3: Press for release (after sealing process)
1. Shift the vacuum chamber and take it out completely.
2. To re-seat the vacuum chamber, place the right end into the
right side of the recess. Make sure the suction nozzle
matches the corresponding hole on the chamber and that
the chamber positioning tongue is placed in its seat .
3. Make sure that the chamber is firmly fixed.
Operating and Handling
50