DIN head unit provision
1. Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure A)
2 Slide the aftermarket head unit into the
cage and secure. (Figure B)
Note: A snap-in DIN spacer has been
provided for some applications where
depth is an issue. Snap the spacer in
the housing and slide the DIN cage into
the assembly and secure by bending
the metal locking tabs outward.
(Figure C)
3. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-3303
7
(Figure A)
(Figure B)
(Figure C)