American Standard Advanced Clean 3.0 SpaLet Manual Del Usario página 39

Removing the Nozzle Shutter
n Open the seat lid and SpaLet
1
n Press the [Nozzle Cleaning] button and
2
open the nozzle shutter.
* The back nozzle will stretch out and push up the
nozzle shutter.
[Nozzle Cleaning]
n Pull the nozzle shutter down toward you
3
with both hands to remove.
n Clean the removed nozzle shutter.
4
● U se a soft, damp cloth to clean.
[CAUTION]
● Do not wipe parts with a dry cloth or toilet paper.
● Do nut scrub with a toothbrush.
* Doing so may cause damage.
Assembling the Nozzle Shutter
®
seat. n Attach the two lugs of the nozzle shutter
1
into the slot in the shutter base from below.
* If the shutter base is closed, perform the procedure
n Press the [Stop] button to return the noz-
2
zle shutter to the original position.
[CAUTION]
● Press until it clicks into place.
Make sure the shutter is correctly installed.
● Installing the shutter in the incorrect vertical orien-
tation can cause malfunctions such as no nozzle
extension or no shutter opening.
● Do not apply excessive force.
* Doing so may damage the part.
described in the "Opening the Nozzle Shutter" section.
Shutter base
Slot
Attach so that the triangle
mark faces forward.
[Enlarged View of the Lug]
Lug
36 - EN