Installation Environment Inspection - Beko BEMPE 090 Manual Del Usuario

9 Notices of installation
• Avoid places subject to strong artificial electric/magnetic fields.
• Avoid places subject to noise and resonance.
• Avoid severe natural conditions (e.g. heavy lampblack, strong sandy wind, direct sunshine or high
temperature heat sources).
• Avoid places within the reach of children.
• Shorten the connection between the indoor and outdoor units.
• Select where it is easy to perform service and repair and where the ventilation good.
• The outdoor unit shall not be installed in any way that could occupy an aisle, stairway, exit, fire
escape, catwalk or any other public area.
• The outdoor unit shall be installed as far as possible from the doors and windows of the neighbors
as well as the green plants.

9.4 Installation environment inspection

• Check nameplate of outdoor unit to make sure whether the refrigerant is R32.
• Check the floor space of the room. The space shall not be less than usable space(5m
specification.The outdoor unit shall be installed at a well-ventilated place.
• Check the surrounding environment of installation site: R32 shall not be installed in the enclosed
reserved space of a building.
• When using electric drill to make holes in the wall, check first whether there is pre-buried pipeline
for water, electricity and gas. It is suggested to use the reserved hole in the roof of the wall.
28 / 172 EN
Free match split type air conditioner / User Manual
2 ) in the