The Form Of Pipe - Beko BEMPE 090 Manual Del Usuario

13 Pipe connection

13.1 The form of pipe

• Wrap up all pipe, water discharge and connection wire from top to below.
• Cover the connection and fix them with two plastic rings.
• Wrap up the pipes with tape alongside the wall and fix them to the wall with clips. These steps are
usually adopted when outdoor unit is installed below the indoor unit.
• In case that you want to have additional water discharge pipe, the end of pipe should be within
certain distance towards to surface ( don't let it under the water. Fix it onto the wall so it won't be
swayed by the wind).
• Wrap the pipes and connection wire well from below to top.
• Wrap up the pipes that are rounded up by the wall corners in the way shown in the picture so it can
prevent water entering the room.
• Use clips or other fixture to fasten the pipes to the walls.
36 / 172 EN
Use sealing tape to cover
the small leaks on the
external ring of the pipe
Round in this shape to prevent water entering
the electrical parts
Round shape
Free match split type air conditioner / User Manual
Wrap up with tape
Pipes
Water discharge pipe
Connection wire
Control panel cover
Connection wire
Round shape
Use sealing tape to
cover the small leaks
on the external ring of
the pipe
See the picture on
the left