Pipe Connection - Beko BEMPE 090 Manual Del Usuario

13

Pipe connection

• Connect the pipe to the unit: point to the center of pipe and fasten by wrench until it is tightly
fastened, the fastening direction is in the following picture.
C
Note: Carefully check if there is any damage of joints before installation. The joints
shall not be reused, unless after re-flaring the pipe.
• Pointing towards the center of pipe, fasten the screw with strength.
• Wrench the screw in the end until you hear the "Click" sound.
Free match split type air conditioner / User Manual
Indoor unit Connection screw Pipe
Wrench
Connection screw
The size of pipe
06.35mm (1/4")
09.52mm (3/8")
012.7mm (1/2")
015.88mm (5/8")
Outdoor unit Side liquid pipe
Torque wrench
Refer the direction to the picture
Torque wrench
Torque
18N.m
42N.m
55N.m
75N.m
Side air pipe
35 / 172 EN