Yakima LANDSHARK Manual Del Usuario página 2

Do you have - square - round - or factory crossbars?
SQUARE BARS ONLY
SQUARE
Loosen the tabs in the
SnapArounds by bending
them repeatedly.
ROUND
(SQUARE continued)
Attach SnapArounds
to REAR crossbar in
opposite direction as
shown (2 per roller).
FACTORY
Attach two MightyMounts
CROSSBARS per saddle.
If your MightyMounts require
bar caps, install them now.
Universal MightyMount
Round / Square Bars:
• Push bolts through diagonally
opposite holes in the saddles,
then into SnapArounds.
• Attach hex keys and tighten.
1032387D-2/12
Follow the Universal MightyMount instructions and refer to this
#03590 instruction for correct installation.
Remove the
tabs with
scissors or
pliers.
Factory Crossbars:
• Push bolts through
the saddles then into
MightMounts.
• Tighten bolts with
MightyMount
wrench.