Descargar Imprimir esta página

Sauder 422811 Manual De Instrucciones página 22

Publicidad

Step 18
To make adjustments to the large drawer, loosen SCREW #3 (#4 in the top drawer) in the SLIDES a 1/4 turn, then
å
turn the cam clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn the cam. By
adjusting the drawers this way, it will help the DRAWER FRONTS line up better when closed. Tighten the SCREWS
when fi nished with adjustments.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. To clean your unit, dampen a cloth with tap water and wipe.
å
And to celebrate, why not share your success story?
Loosen screw #3 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #3.
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
Page 22
Cam
422811
www.sauder.com/services

Publicidad

loading