CASUALPLAY kudu Instrucciones Para El Uso página 22

Adjusting the armrest
• Press the side buttons on the inside of the armrest, and pull the armrest backwards or
forwards to the required position (fig. 11).
• The armrest has a position while in use. It will click when correctly in place.
Changing the direction the seat faces
WARNING: NEVER ADJUST THE SEAT (CHANGING THE DIRECTION IT FACES AND
FITTING OR REMOVING IT) WHILE THE CHILD IS SITTING IN IT.
• Put the parking brake on.
• Press the buttons on both sides of the seat. Next, pull the seat upwards (fig. 12).
• Install the seat in the required position, when correctly fitted it will click into place (fig. 13).
• The child can now sit in the seat.
Adjusting the footrest
• The angle of the footrest can be adjusted for the child's comfort.
• Hold both ends of the footrest and raise it to the required position
• Press the buttons on the sides and lower the footrest to the required position.
Safety strap
• To use the strap, fit it to your wrist.
Adjusting the safety harness
• Put the parking brake on and check that the safety harness is unfastened before
seating the child.
• Position the child in the seat and fasten all the parts of the fastening buckle: chest
straps and crotch strap.
• Lastly, adjust the chest straps of the harness and the abdominal belt to fit the child properly.
Adjusting the backrest
• The backrest has 3 reclining positions. Pull the lever of the reclining system upwards,
and move the backrest up or down as required, once the required position has been
selected, release the lever
• The backrest also has a reclining position suitable for folding the Kudu. Pull the reclining
system lever upwards and move the backrest forwards as far as it will go.
20
(illustration 11)
(illustration 14)
(illustration 15)
(illustration 17)
(illustrations 12-13)
(illustration 16)