Bontempi KTD 3210.2 Libro De Instrucciones página 2

E N G L I S H
BATTERY SUPPLY
Use a screwdriver to open the battery compartment.
Insert 4 x 1.5 V batteries R6/AA (not supplied), ensuring
correct polarity. Re-fit battery cover. Replace batteries
when the quality of sound becomes bad. Use alkaline
batteries to obtain a longer duration.
ADVICE ON USING THE BATTERIES
• Non-rechargeable batteries are NOT to be recharged.
• Rechargeable batteries must be removed from the
product before being charged.
• Rechargeable batteries are only to be charged under
adult supervision.
• Different types of batteries or new and old batteries are
not to be mixed.
• Use only batteries of the same or equivalent type.
• Batteries are to be inserted with correct polarity.
• Remove exhausted batteries to prevent leakage.
• Do not short circuit supply terminals.
• Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items
mentioned here below, please refer to Council
Administration office regarding specialised waste col-
lection centres.
1. DISPOSAL OF BATTERIES
Protect the environment by disposing
of batteries in the special containers
provided for this use.
To ensure that the instrument works perfectly and has a long life, please follow the recommendations below:
• Avoid exposing the instrument to heat sources or keeping it in humid places.
• Keep packaging and all its components to replace and store instrument in case of periods of inactivity or tra
portation.
• Should you notice any malfunction, please contact your nearest authorized dealer.
• If returning the instrument for repair, you should send it in its original packing or pack it in such a way that avoids
damage in transit.
2
MAINTENANCE AND REMARKS
2. PACKAGING DISPOSAL
Take the paper, cardboard and corrugated board to the
appropriate waste collection centres. Plastic material
must be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
01 02
PET PE PVC
Key for the different types of plastic materials:
PET= Polyethylene terephtalate
PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD
PVC =Polyvinyl chloride
PP= Polypropylene
PS= Polystyrene, Polystyrene foam
O= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indi-
cates that the product must not be disposed
of in the domestic waste at the end of its
useful life. Instead, it should be taken to
your nearest designated collection point or
recycling facility. Alternatively, check with your retailer
and return the product when buying a replacement, on
a one-to-one basis or as free of charge in case the size
is smaller than 25 cm. Appropriate disposal promotes
the recycling of parts and materials, as well as helping
to protect the environment and human health. Under
current legislation, strict penalties are enforced against
those disposing of products illegally. For more informa-
tion about the collection of special waste, contact your
Local Authority.
03 05 06 07
PP PS O