Starting Up/Standby/Sleep/Power Off - Amibot Flex Manual Del Usuario

Product Operation
c. The robot will return to charging station automatically when it accomplishes cleaning or battery
power is low.
d. If the robot is not to be used for a long time, fully charge the battery before use, turn the power off,
remove and store it in a cool, dry place.
e. If the robot is not to be used for more than 3 months, charge the robot for 12 hours, turn the power
off, remove and store it in a cool, dry place.
Starting Up / Standby / Sleep / Power Off
1. Starting up
a. Keep pressing the power switch at the right side of the robot for more than 3 seconds.
b. In standby mode, press
Note: If robot is in sleeping mode, press
wake up the robot from sleep mode, then press it again, the robot will start cleaning automatically.
2. Standby
Standby means robot has its power switched on, and is waiting for the user's operation. It can be
changed to standby mode by one of the following methods:
a. During robot cleaning, press
b. During robot cleaning, press the ON/OFF on remote control to power off the robot.
3. Sleep
In sleep mode, the robot can only be woken up from
control. In order to save power, you can turn the robot into sleep mode from standby mode via
either of the following methods:
a. Press
b. Robot will automatically enter sleep mode if no command is received for more than 60 seconds.
4. Power off
Power off means robot has its power switched off, it can be entered by either of the following
methods:
a. In standby mode, press the power switch and hold it for more than 3 seconds.
b. In sleep mode, the robot will automatically power off if there is no operation within 5 minutes.
on main body or ON/OFF on remote control to start cleaning.
on main body and hold it for 3 seconds.
on main body or ON/OFF on remote control to
on main body to enter standby mode.
11
on main body or ON/OFF on remote