Kohler K-3588 Guía De Instalación Y Cuidado página 3

7-1/8"
1"
(181 mm)
(25 mm)
15-1/2"
(394 mm)
17-5/16"
(440 mm)
12"
(305 mm)
Roughing-in
IMPORTANT! A 4" waste outlet must be used for this installation.
IMPORTANT! A flange is not required with this installation. For
ease of installation, do not install a flange.
IMPORTANT! The supply location is not standard, and must be
installed at the location shown.
IMPORTANT! If the subfloor is thin OSB, a 1/2" (13 mm) plywood
support under the subfloor is recommended.
A 1" (25 mm) gap is required between the toilet and the wall.
Locate the supply following the diagram. The supply outlet
should be located horizontally, toward the toilet.
Kohler Co.
14-1/16"
1-3/4"
(357 mm)
(44 mm)
15-9/16"
(395 mm)
9-5/8"
(244 mm)
3/8" NPS Supply
3
1-9/16"
(40 mm)
15-3/8"
(391 mm)
10-1/2"
(267 mm)
1095641-2-E