Complete The Installation; Care And Cleaning - Kohler K-3588 Guía De Instalación Y Cuidado

Tank Lid
Float

7. Complete the Installation

Open the shut-off valve. Make sure the tank fills correctly.
Set the tank lid into place.
Align the flush button in the hole in the lid and thread it into the
flush valve until the tank is firmly held in place.
Flush the toilet several times and check for leaks.
Adjust the Water Level
To adjust the water level, turn the float.
Turning the float counterclockwise raises the water level. Turning
it clockwise lowers the water level.

Care and Cleaning

WARNING: Risk of property or product damage. Do not
use in-tank cleaners in your toilet. Products containing
chlorine (calcium hypochlorite) can seriously damage fittings
in the tank. This damage can cause leakage and property
damage.
Kohler Co. shall not be responsible or liable for any tank fitting
damage caused by the use of cleaners containing chlorine (calcium
hypochlorite).
For best results, keep the following in mind when caring for your
KOHLER product:
Kohler Co. 11
Flush
Button
1095641-2-E