Kohler K-3588 Guía De Instalación Y Cuidado página 6

Styrofoam
Block
Waste
Tube
Gasket
2. Install the Toilet
CAUTION: Risk of personal injury. The toilet is heavy and
awkward. Two people should move the toilet into place.
Reinstall the gasket to the waste tube.
Tilt the toilet to one side and install the waste tube.
Position a support block under each side of the toilet to raise the
base 3" (76 mm) off the floor. The blocks should be positioned so
the supply hose can reach the supply when the toilet rests on
them.
Wet the gasket thoroughly with soapy water or O-ring lubricant.
Insert the provided foam block into the gap between the waste
tube and the surface above it. This will provide support to keep
the waste tube from shifting while inserting the waste tube into
the waste outlet.
Connect the supply hose to the supply stop. Then feed the hose
up through the opening in the bowl for connection with the tank
fill valve.
1095641-2-E
Support Blocks
Connect
supply.
Waste
Stack
6
Supply Hose
Kohler Co.