Step 3: Hook Up; Setting The Speakers - JVC CA-MXJD5 Manual De Instrucciones

Step : Hook Up
3
If you need more detailed information, see pages 6 and 7.
Turn the power off to all components before connections.
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on the rear
may vary.
MD recorder,
Amplifier etc.
Digital Audio
Equipment
TV
To a wall outlet
Plug the AC power cord only after all connections are complete.
• If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.
4
OPTICAL
DIGITAL IN
AV
COMPU LINK EX
AV
COMPU LINK II
Green
Blue
Red
Yellow
To center speaker/Surround speaker
• See "To connect the speakers" on page 6 and
"Setting the Speakers" on page 8.
AM loop antenna (supplied)
Turn it until the best reception is
obtained.
Monaural mini plugs (not supplied)
Optical digital cord (not supplied)
Component video cord (not supplied)
Composite video cord (supplied)
S-video cord (not supplied)