First Start-Up - Madas ITG Serie Manual De Instrucciones

4.0 - FIRST START-UP

• Before start-up make sure that all of the instructions on the rating plate, including the direction of flow, are
observed;
• Cut out power prior to proceeding with wiring;
• Provide a protection against impacts or accidental contacts if the solenoid valve is accessible to unqualified
personnel.
4.1 - RECOMMENDED PERIODIC CHECKS
• Use a suitable calibration tool to ensure the bolts are tightened as indicated in 3.2;
• Check tightness of the flanged/threaded connections on the system;
• Check tightness and operation of the solenoid valve;
It is the responsibility of the final user or installer to define the frequency of these checks based on the severity of the service conditions.
5.0 - APPLICATIONS WITH LEVER MECHANISM AND ACTUATOR
Special engineering solutions on customer request.
Special engineering solutions for application of oil regulators on valve shaft.
Lever mechanism
Joint
SIEMENS
actuator
Madas Technical Manual - 9|9.2 - REV. 0 of 12
AUTOFLAME
actuator
SIEMENS
Plate
actuator
Joint
15
Feb 2019
th
Joint
Plate
Joint
AUTOFLAME
actuator
Joint
Plate
ITG