Troubleshooting - Klarstein Cucinata Manual Del Usuario

What? How?
Boilovers, melts, Remove these immediately with
and hot sugary a fish slice, palette knife or
spills on the razor blade scraper suitable for
glass ceramic glass cooktops, but
beware of hot cooking zone
surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or utensil at
a 30° angle and scrape the
soiling or spill to a cool area
of the cooktop.
3. Clean the soiling or spill up
with a dish cloth or paper
towel.
4. Follow steps 2 to 4 for
'Everyday soiling on glass'
above.

TROUBLESHOOTING

Code Possible Cause
E0 Wrong pot.
E1 Circuit malfunction.
E2 Problem with the temperature sensor.
E3 Surge (more than 275 V).
E4 Undervoltage (less than 100 W).
E5 Overheating of the pot bottom.
E6 The airflow has been interrupted.
Important!
• Remove stains left by
melts and sugary food
or spillovers as soon as
possible. If left to cool on
the glass, they may be
difficult to remove or even
permanently damage the
glass surface.
• Cut hazard: when the
safety cover is retracted,
the blade in a scraper
is razor-sharp. Use with
extreme care and always
store safely and out of
reach of children.
Solution
Use a suitable pot.
Contact a professional.
Contact a professional.
Check the power circuit and find a
suitable power supply.
Check the power circuit and find a
suitable power supply.
Let the appliance cool down.
Check the airflow vents and
clean them from the outside. If
the problem persists, contact a
professional.
EN
29