DePuy Synthes Purevue Manual De Instrucciones página 49

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
Error Code
Error
The internal flash memory
ERROR 0001
has become corrupt .
ERROR 0003
Invalid GUI
ERROR 0004
Boot Failure
ERROR 0005
System Crash
ERROR 0006
System Crash
ERROR 0007
Boot Failure
ERROR 0008
System Crash
ERROR 0092
USB flash drive is invalid
ERROR 0093
USB flash drive is full
USB flash drive failed to
ERROR 0094
write
ERROR 0095
USB flash drive has failed
ERROR 0106
Printer - Invalid printer
ERROR 0107
Printer - Failed to initialize
ERROR 0108
Printer - Paper jam
ERROR 0109
Printer - Door is open
Printer – Replace paper
ERROR 0110
roll
ERROR 0111
Printer – Replace ribbon
ERROR 0112
Printer – unknown error
Possible Solution
This is a device-fatal error . The device must be
returned to DePuy Synthes for service, repair,
or replacement according to the warranty terms
and return policy .
This is a device-fatal error . The device must be
returned to DePuy Synthes for service, repair,
or replacement according the warranty terms
and return policy .
The firmware didn't boot correctly . Reset the
Camera Control System
The firmware crashed while recording video .
Reset the Camera Control System
The firmware crashed while playing video .
Reset the Camera Control System
The video processing did not boot correctly .
Reset the Camera Control System
The video processing firmware crashed . Reset
the Camera Control System
Connect USB Flash Drive FAT 32 format
Remove data from USB flash drive using a
personal computer .
Disconnect and reconnect USB flash drive or
use a different USB Flash Drive FAT 32 format .
Disconnect USB flash drive and use a different
FAT32 formatted USB flash drive .
Connect printer that is compatible with Camera
Control System .
Disconnect and reconnect Printer . Printer may
be non-functioning .
Consult the Printer Instructions for Use .
Close the door on the Printer
Replace the paper roll on the Printer .
Replace the ribbon on the Printer .
Disconnect the Printer . Turn the Printer off and
on . Reconnect the Printer . Printer may be non-
functioning
49

Publicidad

Tabla de contenido
loading

Tabla de contenido