Pump Maintenance - Troy-Bilt 020245 Instrucciones De Uso

Section 5: Maintenance
Pump Maintenance
Changing Pump oim
Change oiH every 50 hours or once yearly, whichever
occurs first.
NOTE: Purchase a premeasured bottle of pump oil item
number H90586GS, by contacting the nearest authorized
service center.
Change
pump
oim as fommows:
H. Drain engine oiH and fuel from pressure washer.
2. Use a 8ram aHHenwrench to remove black pump oiH cap
between high pressure outlet and garden hose inHet
(Figure 22).
OiHCap
3. TiHt pressure washer to drain oiH into an approved
container untiH it drips slowly from pump.
4. TiHt pressure washer in opposite direction and empty
premeasured pump oiH bottle into same opening (a
smaHHfunnel may be heHpfuH).
5. Install bHack pump oiH cap and tighten firmly.
6. Set pressure washer in upright position.Add fueH and
engine oil
ENGINE MAINTENANCE
See the engine owner's manuaHfor instructions on how to
properHy maintain the engine.
CAUTION
Used motor oil has been shown to cause skin cancer in
certain laboratory animals.
Thoroughly wash exposed areas with soap and water.
KEEP OUT OF REACH OF CHILDREN. DON'T
POLLUTE. CONSERVE RESOURCES. RETURN
USED OILTO COLLECTION CENTERS.