4-Mix Engine - Stihl HL 100 Manual De Instrucciones

English
Mounting the Gearbox
Loosen the clamp screws (9).
N
Push the gearbox (10) onto the
N
drive tube (5), turn the gearbox (10)
back and forth as necessary.
16
10
11
Once the end of the drive tube is
inserted beyond the slot in the
clamp (11):
Push the gearbox (10) fully home as
N
far as stop.
Tighten down the clamp screws
N
moderately.
Line up the gearbox (10).
N
Tighten down the clamp screws
N
firmly.

4-MIX Engine

The STIHL 4-MIX engine features
mixture lubrication and must be run on a
fuel mixture of gasoline and engine oil.
It operates otherwise on the 4-stroke
principle.
HL 100, HL 100 K