Assembling The Unit - Stihl HL 100 Manual De Instrucciones

Attachment Application
1) 2)
FCS Edger
1) 2)
FH Power scythe
HL 0° Long reach hedge
trimmer
3)
HL 135° Long reach hedge
trimmer
1)
HT Pole pruners
1) 2)
BF Pick tines
1) 2)
KB (4601) Bristle brush
1) 2)
KW (4601) PowerSweep
1)
may not be mounted to versions
with a short drive tube (HL 95 K,
HL 100 K)
2)
loop handle necessary on versions
with a long drive tube (HL 95,
HL 100)
3)
loop handle is necessary
HL 100, HL 100 K

Assembling the Unit

Mounting the Loop Handle
Necessary on versions with long drive
tube and 135° adjustable cutter bar (not
on HL 100 K).
7
8
2
3
6
9
Place the clamp (1) in the loop
N
handle (2) and position them both
against the drive tube (5) between
the carrying ring (3) and handle
hose (4).
Place the clamp (6) against the
N
drive tube.
Line up the holes.
N
Insert the screws (7) with
N
washers (8).
Fit the square nuts (9) and screw
N
home the screws.
7
8
Align the loop handle (2) and move
N
it to the most comfortable position.
1
Distance (A) must not be more than
21.6 in (55 cm) (recommended:
about 13.8 in (35 cm)).
Tighten down the screws firmly.
N
9
English
A
2
15