Kohler Sterling 4700 Serie Manual Del Usuario página 13

7. Install the Wall Jambs
Attach the Wall Jamb to the Wall
Position a wall jamb over the bottom track and align the holes in the jamb with the holes in the
wall.
Insert a #8-18 x 1-1/2" screw through a bumper and wall jamb and thread it into the wall.
Repeat with the other screws.
Insert the bumper inserts into the bumpers.
Attach the Wall Jamb to the In-line Connector Jamb and Knee Wall
Position the wall jamb over the bottom track and against the in-line connector jamb.
Insert a # 8-18 x 3/4" screw through the top bumper and the wall jamb and attach it to the
connector jamb.
Attach the middle bumper and wall jamb to the connector jamb in the same manner.
Use a #8-18 x 1-1/2" screw to attach the lowest bumper and wall jamb to the knee wall.
Insert the bumper inserts into the bumpers.
Sterling
#8-18 x 1-1/2"
Panhead Screw
#8-18 x 3/8"
Panhead Screw
Adjustable
In-line Connector
In-line
Connector
Jamb
#8-18 x 3/4"
Panhead
Screw
Wall Jamb
Bumper
Bumper
#8-18 x 1-1/2"
Insert
Panhead
Screw
#8-18 x 3/4"
Panhead Screw
#8-18 x 3/8"
Panhead Screw
Ø 1/8"
In-line
(3 mm)
Panel
Hole
13 1211021-2-A