Inside Panel
Inside Rail
Inside Panel
10. Install the Door Panels
NOTE: Perform these installation steps from outside the bath/shower.
Install the Panels
Lift the inside door panel with the rollers facing away from you.
Position the rollers on the inside rail of the top track on the inside panel.
Lift the outside door panel with the rollers facing you.
Position the rollers on the outside rail of the top track on the outside panel.
Check the panels for proper alignment and smooth operation. Adjust as needed.
Adjusting the Rollers (Optional)
Remove the door panel.
Loosen the roller screw(s) and move the roller(s) to another hole in the hanger bracket.
Reinsert and tighten the screws, and reinstall the panel.
1211021-2-A
Raise the
glass.
Front Side
16
Outside Panel
Lower the
glass.
Outside Rail
Front Side
Outside Panel
Sterling