KTM 62112935044 Manual Del Usario página 7

3
2
1
6
8
7
10
10
11
12
- Connect the alarm system (1) with the connector (2) and secure with the
rubber cover. Secure the rubber cover in position (3) using the cable bin-
der. Then fix the alarm system onto the retaining bracket.
Models with ABS
4
Preparations
- Remove the seat.
- Remove the luggage rack (4).
- Remove the left (5) and right (6) heat protectors.
- Remove the left (7) and right (8) side panels.
- Remove the rear fender (9).
9
5
Assembly
- Using a D4.5 mm drill, drill open the marked holes (10).
- Connect the alarm system (1) with the connector (11) and secure with the
rubber cover (12).
- Attach the alarm system (1) to the previously drilled holes, with the con-
nector facing forward, using the cap head screws M4x20 and nuts M4 (both
included).
- Mount the rear fender (9).
- Mount the left (7) and right (8) side panels.
1 - Mount the left (5) and right (6) heat protectors.
- Mount the luggage rack (4).
7