Scope Of Delivery - Gazzini 10039621 Instrucciones De Uso

Translation of original instructions for use
Contents

1 | Scope of delivery

2 | General information
2.1 | Reading and keeping the instructions for use
2.2 | Explanation of symbols
3 | Safety
3.1 | Intended use
3.2 | Safety instructions
4 | Installation
4.1 | Preparation
4.2 | Attaching the mirror
5 | Storage
6 | Cleaning and care
7 | Warranty
8 | Disposal
9 | Contact
10
BAR-END MIRROR
1 | Scope of delivery
Art. no. 10039621
11
11
11
12
12
12
13
14
1 Mirror housing, incl. stem
Bar end for mounting the mirror
2
14
Clamping sleeve set including
3
threaded cone
14
15
2 | General information
15
2.1 | Reading and keeping the instructions for use
15
These instructions for use apply exclusively to the gazzini Bar-End Mirror shown
above (for short: mirror). They contain important information on installation,
15
safety and the warranty. Read these instructions carefully, in particular the safety
instructions, before installing the mirror. Failure to follow the instructions can result
16
in damage to the mirror itself or to your motorcycle, make it less safe to ride on the
road, and possibly cause consequential damage. Keep these instructions for future
reference. If you pass the mirror on to a third party, you must also hand over these
instructions.
The instructions for use are based on the standards and regulations applicable in the
European Union and refl ect current state-of-the-art technology. If abroad, you should
also observe any country-specifi c guidelines and laws.
1
6
3 4
5
2
Cheese-head screw with hex socket
4
DIN 6912 M6 x 50 A2
Round-head screw with hex socket
5
ISO 7380 M5 x 18 A2
Mirror stem
6
11