Transportation And Storage; Technical Data 535Fbx - Husqvarna 535FBX Manual Del Usuario

The engine starts but stops again
Check
Fuel tank
Air filter

Transportation and storage

• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel and chain oil tanks before
transportation or before long-term storage. Discard
the fuel and chain oil at an applicable disposal
location.
• Use the transportation guard on the product to
prevent injuries or damage to the product. A saw
chain that does not move can also cause serious
injuries.
• Remove the spark plug cap from the spark plug.
Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, in./mm
Stroke, in./mm
Recommended max. speed, rpm
Idle speed, rpm
Max. engine output, according to ISO 8893, kW/rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, in./mm
Fuel and lubrication system
1301 - 003 - 20.11.2019
Possible cause
Incorrect fuel type.
The air filter is clogged.
Transportation and storage

Technical data 535FBX

3
Procedure
Empty the fuel tank and fill it with correct fuel.
Clean the air filter.
• Attach the product safely during transportation.
To prepare your product for long-term
storage
1. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION: If the saw chain and guide
bar are not cleaned, they can become
rigid or blocked.
2. Attach the transportation guard.
3. Clean the product. Refer to
page 19 for instructions.
4. Do a complete servicing of the product.
2.11/34.6
1.50/38.0
1.20/30.5
11700
2900
1.6/8400
Yes
Yes
Champion RCJ 6Y
0.02/0.5
Maintenance 535RBX on
29