FujiFilm Instax Square SQ20 Manual De Instrucciones página 39

COMMON SENSE CAMERA CARE
CAMERA CARE
1 Your camera is a precision instrument. Do not get it wet or drop it. Also, do not expose it to sand.
2 Do not use a strap made for cellular phones or other similar electronic products. These straps are usually too weak to
hold your camera securely. For safety, use only straps designed for your camera, and use only as specifi cally intended and
instructed.
3 If you are not using your camera for a long period, keep it where it will be safe from heat, dust, and moisture.
4 Do not use solvent such as thinner or alcohol to remove dirt.
5 Keep the fi lm chamber and camera interior clean to avoid damaging fi lms.
6 In hot weather, do not leave your camera in hot places such as in a car or on the beach. Do not leave it in damp places for
long periods.
7 Moth repellent gas such as naphthalene may aff ect your camera and prints. Be careful to keep your camera and prints in a
safe, dry place.
8 Because your camera is software-controlled, there is the chance that on rare occasions it will malfunction.
If you experience incorrect operation, press the reset button on the camera.
9 Note that the temperature range within which your camera can be used is +5°C to +40°C.
0 Take great care to ensure that printed materials do not violate copyright, image rights, privacy or other personal rights
and do not off end public decency. Actions that violate the rights of others, are contrary to public decency or constitute a
nuisance may be punishable by law or otherwise legally actionable.
HANDLING LCD MONITOR
As the LCD monitor is easily damaged, do not scratch the surface with a solid material. To avoid the LCD monitor getting
damaged, we recommend you attach a protective sheet (commercially available) on the monitor.
EN
39