To Change The Hedge Trimmer Angle (Ha110); To Change The Hedge Trimmer Angle (Ha850) - Husqvarna HA110 Manual Del Usuario

2. Adjust the throttle/speed setting to suit the load.
3. When you use a gasoline operated product to cut a
hedge, make sure the engine face away from the
hedge.
4. Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
To change the hedge trimmer angle
(HA110)
WARNING: Never use HA110 with a battery
operated power unit.
1. Loosen the knob.
2. Press the cutting unit against the hedge or some
other firm surface until the required angle is set.
3. Tighten the knob.
10
To change the hedge trimmer angle
(HA850)
1. Undo the knob.
2. Adjust the angle with the help of the handle on the
cutting unit.
3. Tighten the knob.
WARNING: Do not hold the cutting head
when you adjust the angle. The blades
are sharp and you could easily cut
yourself.
820 - 003 - 07.02.2020