QSC PLD Serie Guide De Mise En Route Rapide página 10

Modify Presets
To modify a preset, start with the desired output configuration, and then modify the input and output parameters as desired. Then save the preset. You
may also save the preset at intermediate points in the creation process.
Recall a Preset
A preset includes the output configuration, input parameters, and loudspeaker profiles (DSP, load, and assignments). The amplifier includes 20 factory
presets that can be recalled but not overwritten and 50 slots for user-defined presets that may be recalled and overwritten. The factory default settings
in U1 through U50 are the same as in factory preset F1 (A B C D).
• Factory presets F1 through F9 are output configurations only; they involve no DSP settings.
• Factory presets F10 through F20 are output configurations along with basic DSP settings.
• The 50 user preset slots can be recalled, modified, and overwritten as desired.
Recalling a preset changes the configuration of the amplifier.
HOME > PRESETS > PRESET RECALL (ENTER)
STEP 1 — Select Preset
F1: A B C D
F1: A B C D
EN
M
Input
STEP 2 — Confirm Selection
F1: A B C D
F18: 3-Way
M
A+B
Press ENTER to confirm selection
Save a Preset
After modifying the inputs and outputs for all channels, save the current settings as one of the 50 user-defined presets (U1 through U50). If you start
with a factory preset, use SAVE AS. If you start with a user-defined preset, you may overwrite it using SAVE or write to a different one using SAVE AS.
SAVE AS
HOME > PRESETS > PRESET SAVE > PRESET SAVE AS > (ENTER)
STEP 1 — Save a New Preset – Select and Edit Preset Number
U1: A B C D
C
Edit preset number or press EXIT
TD-000351-00-E
M M M
A B C
Sub LF MF HF
M C M
User Preset Number:
New Preset Name
o n f i g -
SAVE
Indicates presets available by
D
scrolling
Full
D
The text at the bottom changes to: Recalling Preset now...
You may hear relays clicking inside the amplifier!
Current active
preset.
21
A
10
Scroll to desired preset
20 factory and 50 user-defined
To select the preset configuration, press
To confirm the selection, press
To edit User Preset Number, press
Turn to select desired number (1 through 50)
To confirm, press
ENTER
ENTER
ENTER
ENTER