IKOS ECOpellets 8 Manual Del Usuario página 87

After setting the time periods it is necessary to activate the desired program.
In the main screen, press P3, acess to Power, Thermosts and Chrono menu. With P4 and P6
select the "Crono" (Chrono) menu and press P3 to acess.
In "Modalidade" (Mode) choose the Chrono mode to activate. Use P4 and P6 to navigate
between "Diariamente, Semanal, Fim de Semana)" (Daily, Weekly and Weekend), and use P2
to activate/deactivate the pretended mode. Press P3 to save the changes.
After the activation of a program, in the right upper corner of the main screen, the correspondant
icon apears: D, S or FS.
7 User Info
In this menu the user can check some informations about the stove, as some values and
electronic information.
With P4 and P6 keys the user can see the diferent values. The values are measured in real time.
The following chart explains each variable.
T. Fumos [°C]
T. Amb. [°C]
Fluxo Ar
Extrator [rpm]
Sem Fim [s]
Service [h]
Tempo trabalho [h]
Ignições [nr]
Cód. Artic.
Fumes temperature in Celsius degrees.
Ambiance temperature in Celsius degrees read by the ambience
thermostat placed outside the sove.
Air flux value to combustion in a non-dimensional unit.
Fumes extrator speed in RPMs.
Total of seconds, from 0 to 4, that the pellet feeder is working to provide
the burner with pellets.
Value of the remaining time, in hours, until the maintenance alarm is
activated. This timer should be reseted by the technical service when
maintenance is performed. The maintenance period interval sould
respect the kilograms of burned pellets.
Value, in hours, of the total time the stove is in ON mode, modelation and
safty.
Total number of ignitions since the last time this counter was reseted.
Product code.
EN // 87
USER'S MANUAL
EN