IKOS ECOpellets 8 Manual Del Usuario página 92

Additional cleaning
Additional cleaning should be performed for every 1300-1700 lbs (600-800 kg) of pellets
consumed. Remove the side covers to access the side lids of the combustion chamber. To
clean the interior of the unit, remove the screws, remove the lid and vacuum the ashes. Using
EN a 20-25mm wide 80cm long steel brush thoroughly clean the fume ducts.
If you noticed that the fume extraction is not effective, also clean the extractor. Regardless, this
operation should be performed, at least, once a year.
Cleaning the glass
Allow the unit to cool down completely before cleaning the glass. For cleaning, use a purpose
specific product following the instructions for use on the label. Avoid contact between the
product and rope gasket and painted metal parts of the unit, as this may cause oxidation. The
rope gasket is fixed with glue so any contact with water or any other liquids must be avoided.
The back of the deflector plate should be cleaned once a year.
EN // 92
USER'S MANUAL