Kohler Sterling 65010140 Guia De Instalacion página 4

Mounting
Boss
1/2" (1.3 cm)
Clip
2. Install the Lavatory
NOTE: To avoid possible damage to the cabinet, cut the countertop
before installing the countertop to the cabinet.
Cut out the countertop opening by carefully following the pencil
line traced from the template.
Install the countertop to the cabinet.
Install the faucet and drain to the lavatory according to the
manufacturer's instructions.
Carefully position the lavatory in the cut-out opening.
Select the appropriate mounting clip position based on the
countertop thickness. Refer to above illustration.
Secure the lavatory with the six provided mounting clips and
screws.
Apply a thin continuous bead of sealant around the lavatory
edge.
Immediately wipe away any excess sealant, and fill any voids as
needed.
Verify that the lavatory has not moved out of position.
Allow the sealant to cure for at least 30 minutes before
proceeding.
Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
1032676-2-B
Adhesive
(Not Furnished)
5/8" (1.6 cm)
3/4" (2 cm)
and Thicker
4 Sterling