Technical Data; Preparation Of The Coating Material - WAGNER W 670 Manual Del Usuario

GB
Max. viscosity:
Power source:
Power consumption:
Atomizing output:
Double insulation:
Sound pressure level:
Oscillation level:
Air hose length:
Weight:
1 Air cup
2 Nozzle
3 Union nut
4 Gun body standard spray attachment 13 Mains lead
5 Trigger guard
6 Material volume regulation
7 Handle
8 Combined ON/OFF and speed switch 17 Valve
9 Air hose
Coating Materials Suitable for Use
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.
Coating Materials Not Suitable for Use
Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances.
Coating materials with a flash point below 21 °C.
The following materials can only be processed with optional accessories:
Interior wall paint (dispersions and latex paint)

Preparation of the Coating Material

The enclosed spray attachment can be used to spray paints, varnishes and glazes that are
undiluted or slightly diluted. Detailed information is available in the technical data sheet
of the manufacturer ( Internet Download).
1.
Stir the material up and put the required amount into the paint container.
Sprayed material
Glazes
26

Technical Data

130 DIN-s
220 V ~ / 50Hz
350 W
105 W
80 dB (A)
< 2,5 m/s²
1,8 m
approx. 2.8 kg
Description (fig. 1)
Thinning recommendation
10 Carrying belt
11 Air filter
12 Air screen
14 Spray gun holder
15 Container
16 Ventilating hose
18 Stirring rod
W 670
undiluted