Denon AVR-1604 Instrucciones De Operación página 21

• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as (described) below.
1
Select the speaker whose level you want to
adjust.
(Remote control unit)
2
The channel switches as shown below each
time the button is pressed.
(Remote control unit)
FL CNTR FR SR SB
SW SL
NOTE:
• Please make sure the "AUDIO" position of
the slide switch on the remote control unit.
3
Adjust the level of the selected speaker.
(Remote control unit)
Default setting of channel level is 0 dB.
The level of the selected speaker can be
adjusted within the range of +12 to –12 dB
using cursor buttons.
SW channel level can be turned off by
decreasing one step from –12 dB.
OFF ´ –12 dB ´ 12 dB
All manuals and user guides at all-guides.com
Dolby Surround Pro Logic
1
2
3 3
1, 2
3
4
5
II
mode
Select the function to which the component you
want to play is connected.
Example: DVD
(Main unit) (Remote control unit)
Select the Dolby Surround Pro Logic II mode.
(Main unit) (Remote control unit)
II
• The Dolby Pro Logic indicator lights.
Display
Light
Play a program source with the
mark.
• For operating instructions, refer to the manuals
of the respective components.
Select the surround parameter mode.
Display
MODE cinema
(Main unit) (Remote control unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to "AUDIO".
Select the optimum mode for the source.
(Main unit) (Remote control unit)
MODE DOLBY PL MODE cinema MODE music
or or
ENGLISH
1 2 4, 6 5, 7
The Dolby Surround Pro
II
Logic Cinema or Music
2
mode can be chosen
directly by pressing the
CINEMA or MUSIC button
1
on the remote control unit
during playback in the
Dolby Surround Pro Logic
II
mode.
4, 6
8
5, 7 5, 7
21