Denon AVR-1604 Instrucciones De Operación página 24

ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 14).
Example: DVD
(Main unit) (Remote control unit)
w Set the input mode to "AUTO" or DTS.
(Main unit) (Remote control unit)
2
Select the Dolby/DTS Surround mode.
(Main unit) (Remote control unit)
3
Play a program source with the
mark.
• The Dolby Digital indicator lights
DIGITAL
when playing Dolby
Light
sources.
• The DTS indicator lights when
Light
playing DTS sources.
Operate the SURROUND BACK button to
switch Surround Back CH ON/OFF.
(Main unit) (Remote control unit)
• Lights when the Surround
Light
Back CH is on.
24
All manuals and user guides at all-guides.com
1 1 3
3 2
2
1
4, 5, 6, 7, 8, 9, 10
11
5, 6, 7, 8, 9, 10 5, 6, 7, 8, 9, 10
3
5, 6, 7, 8, 9, 10
,
1
Digital
4
Set the surround parameter according to the
source.
First, press the SURROUND PARAMETER
button.
(Main unit)
NOTE:
• Please make sure the "AUDIO" position of
the slide switch on the remote control unit.
5
Use the (left) and
CINEMA EQ OFF
(Remote control unit)
Press the SURROUND PARAMETER or
COMP. setting.
(Remote control unit)
6
Use the (left) and
D.COMP.
(Remote control unit)
Press the SURROUND PARAMETER or
setting.
(Remote control unit)
NOTE:
• This parameter is not displayed during DTS playback.
7
Use the (left) and
LFE
(Remote control unit)
• The level can be adjusted in units of 1 dB from –10 to 0 dB.
Set to the desired level according to the speaker systems being used and the
(Remote control unit)
source to be played.
Press the SURROUND PARAMETER or
TONE DEFEAT setting.
8
Use the (left) and
TONE DEF.
(Remote control unit)
Press the SURROUND PARAMETER or
SURROUND BACK SPEAKER setting.
(Remote control unit)
(right) buttons to set the CINEMA EQ.
(Initial)
ON OFF
(left) button (right) button
(down) button to switch to the D.
(right) buttons to set the D. COMP.
(Initial)
OFF LOW MID HIGH
OFF
(left) button (right) button
(down) button to switch to the LFE
(right) buttons to set the LFE level.
(Initial)
-10dB -5dB 0dB
0dB
(left) button (right) button
(down) button to switch to the
(right) buttons to set the TONE DEFEAT.
(Initial)
ON OFF
ON
(left) button (right) button
(down) button to switch to the