Removing The Appliance - Siemens BF634.G.1 Manual De Usuario E Instrucciones De Montaje

en Installation instructions
Check the clearance to the adjacent appliances.
2.
3. ATTENTION!
When opening the appliance door, the appliance
may tilt forwards.
Hold the appliance in position when opening the
▶
appliance door.
Open the appliance door slowly.
Screw the appliance to the unit on the opposite side
4.
to the hinges.
Pre-drill the screw holes in the unit on the side with
5.
the hinges.
Cover the door hinges.
Use a wood drill with a 2 mm diameter.
24
Remove any shavings from the cooking compart-
6.
ment.
Screw the appliance to the unit on the side with the
7.
hinges.
Remove any packaging material and adhesive film
8.
from the cooking compartment and the door.
16.8 Removing the appliance
Disconnect the appliance from the power supply.
1.
Undo the fastening screws.
2.
Lift the appliance slightly and pull it out completely.
3.