Before Connecting Your New Appliance; Before Installation; Installation And Connection - Siemens iQ100 Instrucciones De Uso

Before connecting your new appliance

Important safety
precautions

Before installation

Disposing in an
environmentally
responsible manner
Transport damage
Electrical connection

Installation and connection

Please read this instruction manual carefully. Only
then will you be able to operate your appliance safely
and correctly.
Please keep the instruction manual in a safe place.
Pass on the instruction manual to the new owner if
you sell the appliance.
Unpack oven and remove all packing material.
ó
This appliance is labelled in accordance with the
European Directive 2002/96/EC concerning used
electrical and electronic appliances (waste electrical
and electronic equipment - WEEE).
The guideline determines the framework for the return
and recycling of used appliances as applicable.
Check the appliance for damage after unpacking it.
Do not connect the appliance if it has been damaged
in transport.
If the power cable is damaged, it must be replaced by
a specialist trained by the manufacturer in order to
prevent hazards.
This appliance is only intended for domestic use.
Place the tabletop appliance on a firm, level surface
(at least 85 cm above the floor). The ventilation slots
on the left side, rear side and the underside must not
be obstructed.
85