CASUALPLAY KUDU 4 Instrucciones página 21

Instructions for use
IMPORTANT: The Kudu 4 comes with the wheels detached. Before unfolding the
pushchair for the first time, fit the wheels.
Fitting the rear wheels (diagram 1)
• Fit the rear wheels by pressing the central button (a) and inserting the axle into the hole
(b) of the rear wheel bearer (fig. 1). It will click when correctly in place. Check that the
wheel is secure and turns freely.
• To detach the wheels, follow the same steps in reverse order.
Fitting the front wheels (diagrams 2-3)
• Fit the wheel sets into the slots, pressing them upwards until they click into place (fig.
2).
• To detach the wheels, press the release button (fig. 3) and pull the wheel.
Unfolding (diagrams 4–5)
• Release the locking device.
• Pull the handlebar and unfold the pushchair completely.
Locking the front wheels (diagram 6)
• To stop the front wheels from swivelling, press the button upwards. To unlock the
wheels, press the button downwards.
Parking brake functioning (diagram 7)
• To put the brake on press the pedal on the rear right wheel downwards.
• To take the brake off, pull the pedal upwards.
Fitting the seat (diagram 8)
• Put the parking brake on.
• Insert the connectors into the two slots of the side adaptors on the pushchair. They will
click when correctly in place.
• The child can now sit in the seat.
19