Leister WELDPLAST S6 Instrucciones De Funcionamiento página 19

Operating instructions
Read the operating manual carefully before commissioning
and keep it on hand for later consultation.
Leister WELDPLAST S6
Handheld extrusion welder
Application
Handheld extrusion welder for welding thermoplastic materials using a PE or PP welding rod with a diameter of 4 or
5 mm (other materials on request) in the fields of tank construction, apparatus engineering, pipeline construction,
and landfill construction.
Electrically conductive materials (e.g., PE-EL) must not be welded!
Warning
(Translation of operating instructions)
Danger to life when opening the device as live components and connections
are then exposed. Pull the mains plug from the outlet before opening the device.
Electrically conductive materials (e.g., PE-EL) must not be welded!
Danger of fire and explosion with improper use of the handheld extrusion welder
(e.g., material overheating), particularly in the vicinity of flammable materials and
explosive gases.
Risk of burning! Do not touch exposed metal parts or escaping material while hot.
Allow the device to cool down. Do not point the hot air flow or escaping material
at people or animals.
Connect the device to an outlet with a protective conductor. Any interruption
of the protective conductor inside or outside of the device is dangerous!
Use extension cables with protective conductors only!
Conductor cross-section min. 3
Wear hearing protection!
4 mm
× 2
GB
19