Product Description - UFESA AS5200 Manual De Instrucciones

Never use the turbobrush to:
●
Polish floors.
●
Suck:
●
liquids,
●
wet or damp dust,
●
hot ash,
●
burning objects, such as
cigarettes, matches,
●
sharp and hard items, such as:
razors, pins, thumbtacks, pieces
of glass, etc.,
●
flour, cement, plaster, printer or
photocopier toner, etc.
CAUTION!
Not observance can result in
damage to possessions
●
During work the roller of the rotating brush or suction
inlet may get obstructed with rags, papers, etc.
SUGGESTION
Information on the product
and suggestions for its use
●
During operation the brush collects pieces of: threads,
strings, hair, rags, etc. They reduce cleaning efficiency.

Product description

1
Connector
2
Rotating brush
Assembling the turbobrush and
the vacuum cleaner
● Insert the turbobrush connector into the vacuum
cleaner hose handle.
Using the turbobrush
To avoid obstruction of rotating element
remove big rubbish from the cleaned
surface before cleaning.
● Switch the vacuum cleaner on.
In order to use the vacuum cleaner with
the turbobrush safely, especially while
cleaning long hair carpets and animal
skins, it is recommended to test the suction
power of the turbobrush on a small area of the
cleaned surface.
● Slowly push the turbobrush back and forth.
Do not hold the working turbobrush for
a longer time in one place, but constantly
move it, so as not to damage the carpet
(fitted carpet).
While cleaning carpet fringes always
move the turbobrush in the direction
indicated by the arrow (Fig.
It prevents getting the fringes into the rotating
brush.
The speed of the brush roller rotation
depends on the amount of dust in the
dust bag and cleanliness of filters. The
roller may stop rotating on the carpet. Then the
dust bag and filters should be replaced.
H
Maintenance and cleaning of the
turbobrush
I
Before cleaning and maintenance of the
turbobrush it must be disassembled
from the vacuum cleaner.
).
J