Descargar Imprimir esta página

Beyerdynamic Amiron Instrucciones De Uso página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
20
Note:
Make sure that you do not cover the opening for the microphone which is located on the
back of the remote control opposite the buttons.
Depending on the smartphone and version of the operating system and/or firmware, there
may be further call control functions which can be controlled by the centre button
It may also be possible to call the personal assistant (e.g. Siri or Google Assistant) with
the centre button
Maintenance – how to find the FCC/IC/Japan certification number
• To clean the Amiron wireless use only a soft cloth - either dry or slightly damp.
• Do not use cleaners that contain solvents as they can damage the surface.
Since the ear pads are subject to natural wear, they
should be replaced from time to time.
You can do this easily yourself:
• Grasp the ear pad at the rim and pull it off the
headphone housing (refer to illu. 1). Please note that
you need a little bit of physical effort. Alternatively you
can use a blunt flat tool to pull it off (refer to illu. 2).
Warning: Be careful to avoid scratches or other dam-
ages or injuries!
• The FCC/IC certification number is found under the
ear pad and black fleece of the left headphone
housing.
• Attach the new ear pad.
Important: The holding tab on the ring of the ear pad
must lock with the notch of the headphone housing.
Refer also to illu. 3.
In the event that other components require replacement,
please contact your local beyerdynamic representative.
. For more details, please contact the smartphone manufacturer.
Amiron wireless – Headphones
.
Illu. 1
Illu. 2
Notch
Holding tab
Illu. 3

Publicidad

loading