Beyerdynamic Amiron Instrucciones De Uso página 9

Amiron wireless – Headphones
Multi point operation
The Amiron wireless can be paired to up 8 Bluetooth
devices. Active connections can be established with up to two devices at a time. However,
playback of music and phone operation is only possible with one device at a time. Phone
operation has priority over playback of music; i. e. playback of music is interrupted during
phone calls.
The following priorities apply during the use of playback devices PD:
Priority Profile
1 HFP (phone operation)
2 HFP (phone operation)
3 A2DP (playback of music)
4 A2DP (playback of music)
Setting up multi point
• Pair the Amiron wireless with the first device (refer to "pairing with the player").
• Deactivate the Bluetooth
• Switch the Amiron wireless off.
• Press the button
alternating blue and red).
• Pair the Amiron wireless with the second device (refer to "pairing with the player").
• Re-activate the Bluetooth
automatically connects to the Amiron wireless.
• Once both devices are paired with the Amiron wireless, the Amiron wireless
automatically connects with both devices each time it is powered up.
Using up multi point
If you have connected the Amiron wireless with two devices
– and have just activated media playback, briefly tap the touch pad
an incoming call.
– and have just finished a call, briefly tap the touch pad
playback that was playing most recently.
®
wireless technology connection on the first device.
for 6 seconds to start pairing mode (LED
®
wireless technology connection to the first device that
®
wireless technology enabled
Playback device (PD)
PD 1 (device used first)
PD 2 (device used second)
PD 1 (device used first)
PD 2 (device used second)
twice to restart the media
9
flashes slowly
twice to accept