Other Speaker Connection - Pioneer VSX-1020 Manual De Instrucciones

03 Connecting your equipment
[D] 5.1 channel surround system & Front
Bi-amping connection (High quality
surround)
• Speaker System setting: Front Bi-Amp
Bi-amping connection of the front speakers for
high sound quality with 5.1-channel surround
sound.
Plan D
Front Bi-Amp
L
SW
[E] 5.1 channel surround system & ZONE
2 connection (Multi Zone)
• Speaker System setting: ZONE 2
With these connections you can
simultaneously enjoy 5.1-channel surround
sound in the main zone with stereo playback
on another component in ZONE 2 (The
selection of input devices is limited.)
L
SW
Plan E
ZONE 2
16
En
R
C
SR
SL
Main zone
R
C
SR
Sub zone
SL
R
L
Important
• The Speaker System setting must be
made if you use any of the connections
shown above other than [A] (see Speaker
system setting on page 100).
• Sound does not come through
simultaneously from the front height, front
wide, speaker B and surround back
speakers. Output speakers are different
depending on the input signal or listening
mode.

Other speaker connection

• Your favorite speaker connections can be
selected even if you have fewer than 5.1
speakers (except front left/right speakers).
• When not connecting a subwoofer,
connect speakers with low frequency
reproduction capabilities to the front
channel. (The subwoofer's low frequency
component is played from the front
speakers, so the speakers could be
damaged.)
• After connecting, be sure to conduct
the Auto MCACC (speaker environment
setting) procedure.
See Automatically setting up for surround
sound (Auto MCACC) on page 37.