Suzuki 34200-96L2 Serie Manual De Instalación página 4

[Request to Dealers]
These settings must be performed by the dealer, which installed the product, before de-
liver to the customer.
[Before performing the settings]
• Refer to the connection examples of various systems and check the connection of the
gauge.
• Make sure to check the battery, which to be connected, has enough voltage.
• When using Multi-Function Gauge more than one, as a general rule, the setting pro-
cedure should perform the following order.
• Use the minus terminal of the battery as the common use terminal for the engine bat-
tery or connect it to the GND cable.
• When two fuel senders are used, connect them one by one when setting the fuel send-
ers.
• Connect the fuel sender to the gauge of single station at port side.
• When the number of engines is 2, 3 or 4, the fuel sender can be connected to 4.
(1)Activation of Multi-Function Gauge
1) Turn the key on to activate the Multi-Function Gauge.
2) In a short time after indicating the SUZUKI logo, the gauge display appears.
*
4
If the display is not appeared, check the wiring and battery voltage.