Intended Use; Contents; Technical Data - VOSS.farming FS10 Instrucciones De Operación

3

INTENDED USE

The VOSS.farming Fence Sensor FS10 is used to measure the voltage at any point of
your electric fence system in connection with the VOSS.farming Fence Manager FM10
(Art.: 41650). Any other use is prohibited. The purpose of the device is exclusively to
enable additional monitoring and safety for your electric fence system. The device does
not release the fence operator from the obligation to check the electric fence regularly
for faults. The device is intended for personal and commercial use.
4

CONTENTS

The contents include the following:
ऀ 1x VOSS.farming Fence Sensor FS10
ऀ 2x C-LR14 batteries 1.5 V
ऀ 1x magnet with ribbon
ऀ 1x grounding rod
ऀ 1x grounding cable
ऀ 1x connection cable to the fence system
ऀ 1x base antenna
ऀ 2x plastic cable ties for attachment to a fence post
5

TECHNICAL DATA

ऀ Base antenna range:
ऀ Range with external antenna:
ऀ RF transmission frequency:
ऀ Power supply:
ऀ Operating temperature:
ऀ Protection class:
Dimensions and weight
Dimensions incl. antenna (HxWxL) approx.:
Dimensions without antenna (HxWxL) approx.:
Weight incl. antenna and batteries approx.:
Weight incl. antenna, without batteries: approx.:
22
INSTRUCTION MANUAL VOSS.FARMING FENCE SENSOR FS10
up to 10 km
(connection to an external antenna using
an extension cable (2 m or 10 m) is possible)
up to 30 km
869.525 MHz/22 dBm
1.5 V C-LR14 batteries (2x)
–15°C to +50°C
IP44
39.5 x 7.8 x 5.2 cm
15.1 x 7.8 x 5.2 cm
366.2 g
230 g
41645 | 11 | 2020 | V1