Mounting Example 1 - VOSS.farming FS10 Instrucciones De Operación

INSTRUCTION MANUAL VOSS.FARMING FENCE SENSOR FS10
5. Connect the connecting cable to the fence
connector on the device (4) and the electric fence.
6. Pass the cable ties through the brackets on the
back of the device and use them to attach the
device to the fence post.
7. Then check whether the cables are correctly
connected to the device and the fence, i.e. the
grounding pin.
8. Switch the energiser battery and the Fence Sensor
back on.
8.1

MOUNTING EXAMPLE 1

Partitioning the fence system. The benefit in this case is to facilitate localisation in the
event of a voltage drop.
2
41645 | 11 | 2020 | V1
1
3
4
27
DE
EN
EN
FR
IT
NL
SV
ES
PL